Correct Installation Methods of Dust Collecting Filter Bags
Installation methods of external filter bags
1. The mouth of the filter bag and the perforated plate are reliably sealed and fixed;
2. The filter bag is hung vertically below the perforated plate;
3. Adjacent filter bags do not collide with each other;
4. The filter bag correctly matches with the filter bag cage, and the filter bag cage should be straight without burrs.
Installation methods of internal filter bags
1. The upper end of the filter bag is equipped with a bag cap and is hung on the beam of the
dust collector through a hanging device, and the lower end is reliably sealed and fixed with the lower filter bag;
2. The installation of the filter bag should adjust the tension to the specified value, so that the filter bag does not loosen and fall off during the filtering and back blowing, and it should be adjusted again after the first week and the first month of use;
3. The fittings (anti-deflated rings) inside the filter bag should be properly matched, and all the fittings should not have burrs or breaks.
∷
